Water-based Release Agent Manufacturer

Skip to content

Home
About Us
Product

Mold Release Agents (By Material)

Die Casting （Metal）

Polyurethane (PU)

Composites

Concrete

Plastic

Rubber

Silicone

Epoxy Resin

By Chemical Base

Water-based

Oil-based

Wax-based

Silicone-based

PTFE

Lubricants

Cutting Oil for Titanium Alloy (T55)

Semi-synthetic Cutting Fluid (K-707S)

Fully Synthetic Metalworking Fluid (K-303W)

Microemulsified Cutting Fluid

Special Anti-rust Processing Fluid for Steel

Anti-wear hydraulic oil

Accessories

Spray Gun

Ladle Coating

Flux Powder

Plunger Tip

Plunger Lube

Thermoscope Cover

Degassing Tablet

Anti Solder Paste
FAQ
Blog
Contact Us

Search for:

Search for:

Home / By Chemical Matrix / Water-based Release Agent / Page 3

Water Based Release Agent for Die Casting

1
2
3

Industry Applications & Compatible Materials

Polyurethane (PU) Molding: Flexible and rigid foams, footwear soles, automotive interiors, steering wheels, and dashboards.
Die Casting: High-pressure die casting (HPDC) for aluminum, zinc, and magnesium alloys.
Rubber & Composites: Tire curing, rubber hoses, compression-molded gaskets, and resin transfer molding (RTM).
Concrete & Construction: Architectural concrete elements, precast panels, and pipes.

Core Advantages

Zero VOC & Eco-Compliant: The formulation contains no VOCs. It reduces flammability risks and workplace emissions. It also meets strict environmental requirements.
High Dilution Ratios & Cost Control: The concentrated formula can be diluted with water at ratios of up to 1:80–1:150. This helps reduce shipping costs and chemical costs per part.
Superior Thermal Cooling: The release agent cools die-casting mold surfaces quickly. It also forms a continuous film that helps prevent sticking.
Clean Tooling & Minimal Build-Up: The formula leaves little to no sticky residue on mold surfaces. This helps reduce cleaning frequency and can extend mold-cleaning intervals by up to 300%.

Selection Guide: How to Choose the Right Formulation

Ambient to 120°C (248°F): This range is suitable for PU foams and footwear. The recommended dilution ratio is 1:20 to 1:50.
120°C to 220°C (428°F): Suitable for rubber and compression molding. The recommended dilution ratio is 1:40 to 1:80.
220°C to 450°C+ (842°F): This range is suitable for aluminum and zinc die casting. The recommended dilution ratio is 1:100 to 1:150.

Custom Water-Based Release Agents for Different Molding Processes

Every production line has different requirements. We can adjust the water-based formulation based on the molding process.

Anti-Bacterial & Anti-Foaming Additives: These additives help maintain product stability after dilution and during long-term storage.
Corrosion Inhibitors: We can select corrosion inhibitors based on the tool material. The formulation can be adjusted for tool steel and cast iron molds.
Viscosity & Sprayability: We can adjust viscosity for different spray systems. The formulation can work with automatic spray systems or manual electrostatic guns.

ABOUT US

Amino Chemical is a manufacturer specializing in mold release agents and lubricants. We offer high-quality mold release agents: water-based, oil-based, wax, and semi-permanent. These are widely used in making concrete, rubber, epoxy resin, metal casting, and more. We also make lubricants, including cutting oil, cutting fluid, hydraulic oil, slideway oil, heat transfer oil, and more.

FOLLOW US

PRODUCTS

Polyurethane Release Agent

Concrete Release Agent

Mold Release Agent for Plastic