Water-based Release Agent Manufacturer

Ga naar inhoud

Home
Over ons
Product

Ontvormingsmiddelen (per materiaal)

Spuitgieten (metaal)

Polyurethaan (PU)

Composietmaterialen

Beton

Plastic

Rubber

Siliconen

Epoxyhars

Door Chemical Base

op waterbasis

op oliebasis

Op wasbasis

Op siliconenbasis

PTFE

Smeermiddelen

Snijolie voor titaniumlegering (T55)

Semi-synthetische snijvloeistof (K-707S)

Volledig synthetische metaalbewerkingsvloeistof (K-303W)

Micro-geëmulgeerde snijvloeistof

Speciale anti-roest verwerkingsvloeistof voor staal

Slijtvaste hydraulische olie

Accessoires

Spuitpistool

Pollepel Coating

Flux poeder

Dompelbuis

Zuiger Smeermiddel

Thermoscoopdeksel

Ontgassingstablet

Anti-soldeerpasta
FAQ
Blog
Neem contact met ons op

Zoeken:

Zoeken:

Home / Door Chemical Matrix / Lossingsmiddel op waterbasis / Pagina 3

Lossingsmiddel op waterbasis voor spuitgieten

1
2
3

Industry Applications & Compatible Materials

Polyurethane (PU) Molding: Flexible and rigid foams, footwear soles, automotive interiors, steering wheels, and dashboards.
Die Casting: High-pressure die casting (HPDC) for aluminum, zinc, and magnesium alloys.
Rubber & Composites: Tire curing, rubber hoses, compression-molded gaskets, and resin transfer molding (RTM).
Concrete & Construction: Architectural concrete elements, precast panels, and pipes.

Belangrijkste voordelen

Zero VOC & Eco-Compliant: The formulation contains no VOCs. It reduces flammability risks and workplace emissions. It also meets strict environmental requirements.
High Dilution Ratios & Cost Control: The concentrated formula can be diluted with water at ratios of up to 1:80–1:150. This helps reduce shipping costs and chemical costs per part.
Superior Thermal Cooling: The release agent cools die-casting mold surfaces quickly. It also forms a continuous film that helps prevent sticking.
Clean Tooling & Minimal Build-Up: The formula leaves little to no sticky residue on mold surfaces. This helps reduce cleaning frequency and can extend mold-cleaning intervals by up to 300%.

Selection Guide: How to Choose the Right Formulation

Ambient to 120°C (248°F): This range is suitable for PU foams and footwear. The recommended dilution ratio is 1:20 to 1:50.
120°C to 220°C (428°F): Suitable for rubber and compression molding. The recommended dilution ratio is 1:40 to 1:80.
220°C to 450°C+ (842°F): This range is suitable for aluminum and zinc die casting. The recommended dilution ratio is 1:100 to 1:150.

Custom Water-Based Release Agents for Different Molding Processes

Every production line has different requirements. We can adjust the water-based formulation based on the molding process.

Anti-Bacterial & Anti-Foaming Additives: These additives help maintain product stability after dilution and during long-term storage.
Corrosion Inhibitors: We can select corrosion inhibitors based on the tool material. The formulation can be adjusted for tool steel and cast iron molds.
Viscosity & Sprayability: We can adjust viscosity for different spray systems. The formulation can work with automatic spray systems or manual electrostatic guns.

OVER ONS

Amino Chemical is een fabrikant die gespecialiseerd is in ontvormingsmiddelen en smeermiddelen. Wij bieden hoogwaardige ontvormingsmiddelen: op waterbasis, oliebasis, was en semi-permanent. Deze worden veel gebruikt bij het maken van beton, rubber, epoxyhars, metaalgieten en nog veel meer. We maken ook smeermiddelen, waaronder snijolie, snijvloeistof, hydraulische olie, glijbaanolie, warmteoverdrachtsolie en meer.

VOLG ONS

PRODUCTEN

Polyurethaan losmiddel

Betonlosmiddel

Mould Release Agent voor kunststof