Water-based Release Agent Manufacturer

Loncat ke konten

Beranda
Tentang Kami
Produk

Bahan Pelepas Cetakan (Berdasarkan Bahan)

Pengecoran Tekanan (Logam)

Poliuretan (PU)

Bahan Komposit

Beton

Plastik

Karet

Silikon

Resin Epoksi

Berdasarkan Bahan Kimia

Berbahan dasar air

Berbahan dasar minyak

Berbasis lilin

Berbasis silikon

PTFE

Pelumas

Cutting Oil untuk Paduan Titanium (T55)

Cairan Pemotongan Semi-sintetis (K-707S)

Cairan Pengerjaan Logam Sepenuhnya Sintetis (K-303W)

Cairan Pemotongan Mikroemulsi

Cairan Pemrosesan Anti Karat Khusus untuk Baja

Oli hidraulik anti aus

Aksesori

Pistol Semprot

Lapisan Sendok

Bubuk Fluks

Ujung Plunger

Pelumas Plunger

Penutup Termoskop

Tablet Degassing

Pasta Anti Solder
PERTANYAAN YANG SERING DIAJUKAN
Blog
Hubungi Kami

Cari:

Cari:

Beranda / Dengan Matriks Kimia / Bahan Pelepas Berbasis Air / Halaman 3

Agen Pelepas Berbasis Air untuk Die Casting

1
2
3

Industry Applications & Compatible Materials

Polyurethane (PU) Molding: Flexible and rigid foams, footwear soles, automotive interiors, steering wheels, and dashboards.
Die Casting: High-pressure die casting (HPDC) for aluminum, zinc, and magnesium alloys.
Rubber & Composites: Tire curing, rubber hoses, compression-molded gaskets, and resin transfer molding (RTM).
Concrete & Construction: Architectural concrete elements, precast panels, and pipes.

Core Advantages

Zero VOC & Eco-Compliant: The formulation contains no VOCs. It reduces flammability risks and workplace emissions. It also meets strict environmental requirements.
High Dilution Ratios & Cost Control: The concentrated formula can be diluted with water at ratios of up to 1:80–1:150. This helps reduce shipping costs and chemical costs per part.
Superior Thermal Cooling: The release agent cools die-casting mold surfaces quickly. It also forms a continuous film that helps prevent sticking.
Clean Tooling & Minimal Build-Up: The formula leaves little to no sticky residue on mold surfaces. This helps reduce cleaning frequency and can extend mold-cleaning intervals by up to 300%.

Selection Guide: How to Choose the Right Formulation

Ambient to 120°C (248°F): This range is suitable for PU foams and footwear. The recommended dilution ratio is 1:20 to 1:50.
120°C to 220°C (428°F): Suitable for rubber and compression molding. The recommended dilution ratio is 1:40 to 1:80.
220°C to 450°C+ (842°F): This range is suitable for aluminum and zinc die casting. The recommended dilution ratio is 1:100 to 1:150.

Custom Water-Based Release Agents for Different Molding Processes

Every production line has different requirements. We can adjust the water-based formulation based on the molding process.

Anti-Bacterial & Anti-Foaming Additives: These additives help maintain product stability after dilution and during long-term storage.
Corrosion Inhibitors: We can select corrosion inhibitors based on the tool material. The formulation can be adjusted for tool steel and cast iron molds.
Viscosity & Sprayability: We can adjust viscosity for different spray systems. The formulation can work with automatic spray systems or manual electrostatic guns.

TENTANG KAMI

Amino Chemical adalah produsen yang berspesialisasi dalam bahan pelepas cetakan dan pelumas. Kami menawarkan bahan pelepas cetakan berkualitas tinggi: berbahan dasar air, berbahan dasar minyak, lilin, dan semi permanen. Bahan-bahan ini banyak digunakan dalam pembuatan beton, karet, resin epoksi, pengecoran logam, dan banyak lagi. Kami juga membuat pelumas, termasuk cutting oil, cutting fluid, oli hidrolik, oli slideway, oli perpindahan panas, dan banyak lagi.

IKUTI KAMI

PERTANYAAN YANG SERING DIAJUKAN

PRODUK

Agen Pelepas Poliuretan

Agen Pelepas Beton

Agen Pelepas Cetakan untuk Plastik