The post Silicone-Free Aluminum Die Casting Release Agent (MK-TE) appeared first on AMINO.
]]>Forms dense protective coating to resist high pressure and washing, prevents soldering between casting and mold and optimizes molten aluminum fluidity.
Eliminates blackening, water marks and cold shut, well compatible with post electroplating, polishing and surface finishing.
Reduces thermal and mechanical impact from molten aluminum, prolongs mold service life and lowers maintenance cost.
No scale or oxide residue on molds to cut cleaning frequency greatly.
Thermal weight loss less than 10% under 300℃, stable within 200~300℃ working range.
Stabilizes mold temperature to avoid sticking, bubbling, cracking and burning defects.
Low odor, non-toxic, non-flammable and non-corrosive without harmful fume during production.
Technology and Quality. AMINO has over 20 years of industry leadership experience and cutting-edge formulas from Japan. We ensure that product quality is always maintained at high standards.
Capacity and Cost. Chinese factories directly supply our products. We produce 600 metric tons each month, and our prices are very competitive.
Global delivery. Samples are usually delivered via international express delivery within 3-5 days. The bulk order will ship via sea freight within 30 days of payment confirmation. The products have been successfully sent to Pakistan, Egypt, Türkiye, Thailand, and more.
Professional support. Our technical team with an average of 10 years of experience can provide timely, professional after-sales support and service.
The post Silicone-Free Aluminum Die Casting Release Agent (MK-TE) appeared first on AMINO.
]]>The post Bladder Release Agent (MK-1038W) appeared first on AMINO.
]]>Free of benzene and chlorinated solvents, compliant with environmental production requirements.
Available for automatic spraying, handheld spray and brush construction to match various tire workshop production equipment.
Forms durable protective film, realizes repeated vulcanization & demolding cycles; usable times depend on vulcan temp, duration and bladder structure.
Solid content ranges from 20%~30%, good film-forming property and excellent surface slip effect.
Stable under working temperature 70~150℃ after reasonable water dilution.
Cut waste caused by bladder sticking and reduce comprehensive production cost.
Technology and Quality. AMINO has over 20 years of industry leadership experience and cutting-edge formulas from Japan. We ensure that product quality is always maintained at high standards.
Capacity and Cost. Chinese factories directly supply our products. We produce 600 metric tons each month, and our prices are very competitive.
Global delivery. Samples are usually delivered within 3-5 days by international express; bulk goods will be shipped by sea within 30 days after payment confirmation. The products have been successfully exported to Pakistan, Egypt, Türkiye, Thailand and more.
Professional support. Our technical team with an average of 10 years of experience can provide timely, professional after-sales support and service.
The post Bladder Release Agent (MK-1038W) appeared first on AMINO.
]]>The post PU Elastomer Release Agent (MK-411W) appeared first on AMINO.
]]>AMINO MK-411W is a water-based release agent for PU elastomer products. It features excellent heat and chemical stability, good demolding effect, non-corrosive and no residue. It is used for PU rollers, seal rings and automotive brake pads.
1. Excellent heat stability
Works stably under 30–180℃.
2. Good chemical resistance
Stable in PU elastomer reaction environment.
3. Non-corrosive to molds
Protects mold surface effectively.
4. No residue on molds
Easy to clean and maintain.
5. Does not affect adhesion
Safe for bonding and painting processes.
6. High dilution ratio
Dilutable 1:8–15 with water to save cost.
The post PU Elastomer Release Agent (MK-411W) appeared first on AMINO.
]]>This high-performance release agent boosts production efficiency. It offers great heat resistance and reliable performance, even at high temperatures. Its non-toxic ingredients help maintain a safer working environment while minimizing residue accumulation.
Are you interested in upgrading your casting process with our high-quality release agent? Contact us immediately for bulk pricing and customized solutions!
Get a Quote
The post Insulation & Release Agent for Die Casting MK-120H appeared first on AMINO.
]]>AMINO MK-120H is a gray and white liquid. It’s water-based and thick. This product comes from advanced Japanese technology and is made for general metal ingot casting. It offers a great demolding effect and a bright white surface for aluminum, magnesium, and zinc castings. This makes it the top choice for foundries that want efficient, clean production.
Make sure the casting surface is bright, white, smooth, and clean. This avoids extra cleaning steps and won’t affect deep processing like electroplating or painting.
It quickly creates a thick protective film on the mold’s surface. This stops the metal liquid from sticking to the mold. As a result, demolding is smooth, and yield improves greatly.
The unique formula stops carbon deposition or oxide scale on the mold and product surface during long-term use. This helps extend the mold’s life.
It cools well and sets the mold temperature between 150-200 ℃. This helps reduce cracks from thermal stress and shortens the production cycle.
The isolation film is uniform and stable. It sticks well to mold surfaces up to 200 ℃ without splashing or buildup. Plus, it offers great lubrication performance.
The product is non-toxic, non-flammable, and non-corrosive. It also won’t create harmful smoke or odors when used. This ensures a clean and safe working environment.
The post Insulation & Release Agent for Die Casting MK-120H appeared first on AMINO.
]]>The post Silicone-free Die Casting Release Agent MK-TC appeared first on AMINO.
]]>AMINO MK-TC is a milky white water-based liquid. It is designed specifically for silicone-free aluminum die-casting processes. It can provide an efficient and pollution-free demolding effect. This product is well-suited for producing castings with extremely high surface-quality requirements. For example, household appliances, motorcycle parts, and medium-sized automotive parts.
Fundamentally avoids surface contamination of castings caused by silicon migration. So, it improves the yield of subsequent secondary processing procedures.
The film remains stable at mold temperatures up to 300 ° C. There is no premature decomposition or failure. It provides continuous demolding protection.
A single spray can support multiple continuous demoldings. It significantly improves production efficiency. At the same time, it reduces the consumption of demolding agent per unit product.
The formed isolation film can promote the casting to wholly and quickly detach at the moment of mold opening. It can effectively reduce ejection stress and extend mold life.
The post Silicone-free Die Casting Release Agent MK-TC appeared first on AMINO.
]]>The post Die Casting Release Agent for Pure Aluminum MK-TL appeared first on AMINO.
]]>MK-TL is a water-based, pure aluminum die-casting process-specific release agent. It is commonly used to make pure aluminum castings. These castings are for household appliances, motorcycle parts, and medium-sized automotive parts. It has no carbon buildup, a bright white surface, and doesn’t impact later processing. This ensures both surface quality and the performance of castings.
AMINO Aluminum Release Mold Spray can form a dense, strong, low-friction film on the mold surface. This effectively avoids sticking between the casting and mold. Our products also boost lubrication. This helps aluminum flow faster, making molding quicker.
AMINO spray uses rare, high-performance materials. It gets rid of common problems like blackening, too much water lines, and cold shuts. It also improves post-processing results, such as polishing and electroplating.
AMINO mold release agent pure aluminum die-casting creates a protective film. This film can reduce mold heat and cushion the influence of molten aluminum. Therefore, our product extends mold life, minimizes wear, and reduces maintenance needs.
AMINO mold release agent pure aluminum die-casting is easy to operate. Furthermore, it does not leave carbon deposits, residues, or oxidation. It ensures the product surface is bright and clean.
Our products have excellent thermal and chemical stability. They can resist oxidation, combustion, and corrosion up to 300°C.
AMINO release agents do not contain harmful materials. So, they are safe and friendly for operators and the environment.
The post Die Casting Release Agent for Pure Aluminum MK-TL appeared first on AMINO.
]]>If you need to purchase this product in large quantities, please contact us for more detailed information.
The post Water Based Aluminum Die Casting Mold Release Lubricant MK-2232W appeared first on AMINO.
]]>Our aluminum die-casting mold release lubricant is stable, non-hazardous, and easy to clean. It provides excellent release and lubrication performance.
1. Environmental friendliness. AMINO aluminum die casting lubricant is non-toxic. It complies with RoHS and REACH standards.
2. High performance. Our product has high lubrication and release performance. Besides, it is hard to stick to the mold. The product surface is smooth and bright, with no water waves.
3. Save costs. AMINO aluminum die-casting lubricant has a high dilution ratio. So, it can reduce material costs and improve productivity.
AMINO aluminum die-casting lubricant is an ideal choice for medium-sized and complex aluminum alloy fittings. It has a wide range of applications, such as lampshades, motorcycles, and medium-sized automotive fittings.
Yes. It is easy to clean. Besides, AMINO aluminum die-casting lubricant is not affected by the spray process.
No. Our product does not cause deposition troubles. It can form an even film.
The post Water Based Aluminum Die Casting Mold Release Lubricant MK-2232W appeared first on AMINO.
]]>The post Water Based Release Agent for Zinc Alloy Die Casting MK-TH appeared first on AMINO.
]]>This product works well for many zinc alloy parts made by hot- and cold-chamber die-casting. It includes precision die-casting items like lighting accessories, zippers, fasteners, and buttons.
AMINO Zinc Alloy Die Casting Release Agent can form a uniform film on the surface of high-temperature molds. It ensures an excellent demolding effect in high-temperature environments.
Our products can quickly achieve an ideal level of lubrication. This feature shortens the production cycle and improves productivity.
Prevent welding issues and significantly reduce the risk of mold pitting and corrosion. The low gas generation characteristic further extends the mold’s service life.
Great demolding gives a bright, smooth casting surface. This meets high-end appearance standards and cuts out the need for extra cleaning.
The product is easy to use and clean, with minimal residue, effectively reducing equipment maintenance costs and production downtime.
The post Water Based Release Agent for Zinc Alloy Die Casting MK-TH appeared first on AMINO.
]]>The post Release Spray for Zinc Alloy Die Casting MK-TG appeared first on AMINO.
]]>This product works well for different zinc alloy parts. It’s good for both simple and complex shapes made by hot- and cold-chamber die-casting machines. It includes precision die-casting parts such as lighting accessories, zippers, fasteners, and buttons.
There is no carbon deposition or oxide scale on the surface of molds and castings. It ensures the quality of subsequent surface treatments. For example, electroplating and flame spraying are not affected.
Our zinc alloy die-casting release agent forms a dense barrier film on the mold’s surface after spraying. This film effectively prevents sticking between the casting and mold. So, it can ensure smooth and unobstructed demolding every time.
Using a mold temperature of 150-200 ℃ can reduce thermal and cold-stress breaks in the mold, effectively shortening production cycles.
The film formation is uniform without accumulation, and it maintains good adhesion on the surface of the mold up to 200 ℃. The casting surface is bright without splashing.
This MK-TG product is toxin-free, non-flammable, and non-corrosive. Besides, it does not produce harmful materials or odors during use. Therefore, it is safe and friendly to operators and the working environment.
The surface of the casting has no residue, making it easy to clean and maintain, eliminating subsequent processing steps and improving production efficiency.
The post Release Spray for Zinc Alloy Die Casting MK-TG appeared first on AMINO.
]]>If you want to buy magnesium alloy die-casting release agents, please contact our team. Our sales team will get back to you within 24 hours.
Get a Quote
The post Water Based Magnesium Die Casting Release Agent MK-300 appeared first on AMINO.
]]>MK-300 release agent works well for magnesium alloy die-casting. It’s great for larger parts that are 0.5mm thick or more. This includes precision electronic components, aviation products, computer casings, and mobile phone middle-boards.
Our products use heat-resistant film-forming material. So it can maintain good adhesion even when the mold surface temperature reaches 320 ℃. Besides, it prevents carbon deposits or oxides from forming on the molds and casting surfaces.
AMINO magnesium alloy die-casting release agent features temperature-adaptive lubrication. So, it can form a uniform film without accumulation and provide great lubrication at high temperatures. It ensures complete filling of the molten metal. Additionally, our product significantly reduces friction between the molds and the castings.
Quick moisture evaporation removes excess heat, keeping the mold at the right temperature. The lubrication and insulation films form at the same time. This helps fill the magnesium alloy melt smoothly and cool it quickly.
The odor is mild and non-irritating. It doesn’t create an oil mist during use, keeping the workshop environment pleasant.
Our product provides excellent anti-oxidation and corrosion protection for magnesium alloy products. The casting contours are clear, and the surface is smooth. Besides, the finished product does not influence the subsequent coating treatments.
AMINO MK-300 has high biodegradability. It does not have harmful materials, which meet environmental safety standards.
The mold’s surface is nearly free of residue. It’s easy to clean and maintain. The product’s surface is smooth, so no cleaning treatment is needed.
The post Water Based Magnesium Die Casting Release Agent MK-300 appeared first on AMINO.
]]>